![]() |
|
|||||||||||
|
|
This rack can still be ordered but only without the tubs so you will need to have your own available. Sorry about that.
Each Blanket Box Rack is 36 3/16 " tall, 18 1/2" deep front to back and 23" wide. We have built it as large as possible and still stay within the limits to FedEx this invaluable piece of equipment to your door. Each drawer space will hold either one Rubbermaid 2221 tub or two Rubbermaid 2220 tubs. These are the tried and true plastic boxes that have been used by herpers for years. You cannot purchase these racks with tubs any longer. The size of each Rubbermaid #2221 tub is 22 1/4" x 16 1/4" x 5 3/4" tall. This is the "Sideways Blanket Box" rack. Stack them two high if you like! PRICING 1-Sideways
Blanket Box Rack : $339 each These racks do not include any tubs!
|
|||||||||||
|
Order
Center:
We accept checks, Money Orders or Credit Card payments. We happily accept Credit Cards through PayPal on-line. For your convenience we have set up an automated on-line ordering system found below. After clicking the "Shopping Cart" button and then the "Proceed to Checkout" button you will be taken to our secure server at PayPal where you can place your order safely and securely. Please note I will assume you would like black unless you specify otherwise. Please click here for information regarding the timing of your order:
For those who wish to order by sending a Money Order or Check please send your payment to the following address: Jeff Ronne PO Box 394 Cannon Falls, MN 55009 95% of our customers choose black for their cages and racks. For this reason we will assume your order is for black "Boaphile Plastics" unless you specify otherwise. You may take advantage of the discounts offered here at "Boaphile Plastics" which can be calculated from the regular prices or pay the discounted prices as detailed here whichever saves you more money. Discounts can't be doubled up please. Larger quantity pricing available upon request. |
||||||||||||
|
Here we illustrate one of the reasons "Boaphile Plastics" is fast becoming a favorite of many Reptile keepers. These racks are built deep enough that you have a full 2" of ledge in front of the tub. This has a couple of practice uses. 1. A drawer can be left forward without being open to remind you that you need to come back to that drawer for one reason or another. 2. Feeding your kids may not be all done on your first trip through the tubs. Simply leave an extra food item on the ledge to remind yourself you still have a critter to feed. I am just trying to make your and my job easier. (The photo is of the "Blanket Box Rack" but the same ledge is included on this "Sideways Blanket Box Rack")
Each rack comes with a long cord ready to plug into your thermostat.
The photo above shows the size of the individual Rubbermaid 2221 Blanket Box. The photo above shows the size of the individual Rubbermaid 2220 Blanket Box.
Tolerances: Our racks allow you to use your drawers without their lids saving you time. The spaces in which the drawers slide are perfectly sized alike. The space above each drawer is .050" which is less than 1/16". This will not allow even a hatchling Garter Snake to escape. Perfect for nearly all neonates. Each shelf is dadoed into the ends and the back. Even the vertical dividers are dadoed into the back! We are aiming for perfection, predictability and consistency. Heating: The Flexwatt is "sandwiched" between two sheets of plastic at the back of the rack. These two sheets of plastic are completely glued. This heats the rear of the tub giving the herp a nice thermogradient within the tub. The rear of the tub has this heat including "belly" heat due to the fact that heat radiates into the shelves at the rear as well. The Flexwatt is included and installed. We only use a special low wattage Flexwatt. This heat source is less than 10 watts per square foot. Set up and stacking: The racks are totally stackable but are intended only to stacked on top of racks of identical size. Racks should be set up on a hard surface and not directly on carpet. Setting directly on carpet may impede the ability to pull out the bottom drawers with ease. If your Reptile room is carpeted simply set your rack on a piece of plywood, particle board or melamine for a flat hard surface.
|
||||||||||||
Please click here for information regarding the timing of your order:
Have questions? For a prompt response please contact our sales department:
Boaphile
Plastics Sales
(507) 263-7289
sales@boaphileplastics.com
Have questions? For a prompt response please call our knowledgeable sales
department:
Boaphile
Plastics Sales
(507) 263-7289
sales@boaphileplastics.com
Mailing address:
Jeff Ronne Sr.
PO Box 394
Cannon Falls, MN 55009
(507)
263-7289
FAX
(507)263-2621
sales@boaphileplastics.com
Content
© 1998 - 2009 Boaphile Enterprises - Unless Stated Otherwise